Once the screw is out, pull off the trim surrounding the door handle. Remove Torx screw (T27) from door handle recess.It is held in with a fairly strong spring clip at the top: just pull firmly and it'll come. (Fronts only) Remove Phillips screw from mirror cover and remove mirror cover.If you can reach it, the tool needs to be inserted in the top right part of the plastic cover rather than in the position shown in the pic, as this may leave the cover scratched or damaged: Ignore the tweeter in this shot, and you may prefer to use two hands if you're not also holding a camera. Be very careful not to lose them when they fly out, and take care not to mark the plastic. Remove the circular screw covers on mirror cover (fronts) and door handle recess using a sharp point (knife?).Torx T27 driver, although most people may only have a T25 driver, which will work, but with a loose fit.Medium-sized Phillips-head screwdriver (cross-head, No 2 size). ![]() Wide flat-blade screwdriver or similar tool.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |